Polytetrafluoroethylene push rod

1. The PTFE push rod has a diameter of 8mm-100mm and is made by suspending polytetrafluoroethylene resin. In the known plastics, PTFE has the best chemical resistance and dielectric properties, is not aging, is not sticky, can be used at -180 ° C - + 260 ° C under no load, in the known solid It has the lowest coefficient of friction in the material.

2. Performance: Item Unit Index SFB-1 SFB-2 Specific Gravity - 2.10-2.30 2.10-2.30 Tensile Strength Mpa ≥14.0 - Elongation at Break % ≥14.0 -

3. Uses: Electrically insulating parts, gaskets, anti-stick materials.